How to Adjust the OKC Abner 89er 5950 Cap for a Perfect Fit

By Oklahoma City Comets Official Store | Published: 2026-10-28

Category: How-to Guides

Learn how to get a snug, comfortable fit from your OKC Abner 89er 5950 fitted cap—including sizing checks, break-in tips, and when to size up.

Quick answer

To get a perfect fit from your OKC Abner 89er 5950 cap, first measure your head and match it to the size chart, then use steam and gentle stretching to fine-tune the fit—but avoid over-stretching, which can distort the cap.

Why the 5950 fit is different

The New Era 5950 is a fitted cap, meaning it has no adjustable strap or buckle. The fit comes entirely from the size you choose, and the cap will conform slightly to your head over time. Because the OKC Abner 89er 5950 cap is available in sizes from 6 7/8 to 8, getting the right starting size is the most important step.

A fitted cap that is too tight can cause headaches, while one that is too loose will sit awkwardly and may even blow off in wind. The good news: you can make small adjustments at home, but you cannot change the size drastically. If your measurement falls between sizes, it's usually better to size up and use a sizing tape or foam strip for a snug fit.

Know your limits: what you can and cannot adjust

You can break in a slightly tight cap, stretch it a little with steam, or add padding to make a loose cap fit better. However, you cannot shrink a cap that is too large, and you cannot make a cap that is two sizes too small fit comfortably. If you are between sizes and the cap is too tight, consider a different size rather than trying to stretch it beyond its limits.

Step-by-step fit adjustment

Measure your head accurately: Use a flexible tape measure around your head, just above your ears and across the middle of your forehead. Note the measurement in inches or centimeters, then compare it to the New Era size chart. If you don't have a tape measure, use a string and a ruler. Check the size chart for your exact measurement; if you're between sizes, choose the larger size.
Check the fit before adjusting: Place the cap on your head. It should sit snugly without leaving red marks on your forehead. The cap should not slide when you shake your head gently. If it feels too tight or too loose, you'll know which adjustment to make. A proper fit means no pinching and no slipping.
Break in a tight cap with wear: For a cap that's slightly tight, wear it around the house for a few hours each day. The material will gradually conform to your head. Avoid wearing it in the rain or getting it soaking wet, as that can cause shrinkage. Be patient—break-in takes a few wears, not a single day.
Use steam to stretch a tight cap: Hold the cap over a pot of boiling water (or use a handheld steamer) for about 30 seconds, focusing on the crown. Then put the cap on your head while it's still warm and damp. Wear it until it dries. This can add a little extra room. Do not over-steam—too much heat can warp the brim or distort the cap's shape.
Add padding for a loose cap: If the cap is slightly loose, place a thin foam strip or a piece of double-sided tape inside the sweatband at the forehead. This will help the cap grip your head without changing the outer appearance. Use only a thin layer—too much padding will make the cap sit too high.
Know when to size up or down: If the cap is too tight even after steaming, or too loose after adding padding, it's best to exchange for a different size. The 5950 is fitted, so the size range (6 7/8 to 8) is your only adjustment option. Don't force a fit—the right size will feel comfortable from the start.

Product facts

OKC "Abner 89er" 5950 Cap: This OKC Abner 89er 5950 cap is a New Era 5950 fitted style, available in sizes from 6 7/8 to 8. Because it's fitted, choosing the correct size from the start is essential; the cap will not adjust like an adjustable cap.
OKC "Abner 89er" 5950 Cap